Click image to view full size image
Working Flow:
Decoiling the Sheet-->Sheet Guiding-->Film Vovering-->Roll Forming-->Measure Lengh-->Cutting the Sheet-->Sheets to the Supporter.
Machine Features:
1. Precise forming;
2. High-solid forming stand guarantees the good and uniform high quality of final products;
3. The operation automatically minimizes the tolerance of cutting length.
Products Features:
1. A stylish and attractive design, giving the apperance of a tradition roof tile;
2. Resistant to frost, heat, hail and gales; 100% waterproof, due to the lateral run-off channel on each sheet for several models;
3. The raw material can be in different colors, with elegant and noble looking. It is widely used as the roof of factory, hotel, exhibition, villa, civil construction, and etc.
Technical Parameters:
| Material | colored sheel sheet or galvanized steel sheet | |
| Thickness of coil sheet | 0.3-0.7mm | |
| Forming station | 14 or 16 | |
| Material of cutting blade | Cr12 | |
| Main motor power | 4kw | |
| Hydraulic station power | 3.5kw | |
| Hydraulic station pressure | 10-12Mpa | |
| Forming speed | 10-12m/minute | |
| Controlling system | PLC,model S7-200,Siemens | |
| Index error of length | 36m | |
| The largest camber action | 10m+-2mm | |
| Voltage | 380V 3 phase 60Hz or according to buyer's requirement | |
| Total weight | 6-10MTS | |
| Terms: | ||
| 1. Delivery: 50-60days | ||
| 2. Package:Export Standard package in container | ||
| 3. Payment:TT(30% by TT down payment ,balance by T/T before shipment or irrevocable L/C at sight) | ||
| 4. Validity: good for 30days |
Automatic and hydraulic control roof tile machine
